Home Connect™
en-us
23
14.2 Changing the basic settings
1.
Press
.
2.
To open the basic settings, press for approx. 3 sec-
onds.
3.
Press repeatedly until the display shows the required
setting.
4.
Press or repeatedly until the display shows the
right value.
You can change one or more settings.
5.
To save the settings, press for approx. 3 seconds.
14.3 Setting the time
1.
To open the basic settings, press for approx. 3 sec-
onds.
2.
Press repeatedly until the display shows "Time set-
ting".
3.
Press or repeatedly until the display shows the re-
quired time.
Holding down and will change the set values in 10-
minute steps.
4.
To save the settings, press for approx. 3 seconds.
Home Connect™
15 Home Connect™
Home Connect™
This appliance is network-capable. Connecting your appli-
ance to a mobile device lets you control its functions via
the Home Connect™ app.
Home Connect™ services are not available in every coun-
try. Availability of the Home Connect™ function depends
on the availability of Home Connect™ services in your
country. You can find information on this at: www.home-
connect.com.
To be able to use Home Connect™, you must first set up
the connection to the WLAN home network (Wi-Fi
1
) and to
the Home Connect™ app.
¡
"Connecting appliance to the WLAN home network
The Home Connect™ app will guide you through the en-
tire registration process. Follow the instructions in the
Home Connect™ app to make the settings.
Tips
¡
Please consult the Home Connect™ documents sup-
plied.
¡
Please also note the information in the Home Con-
nect™ app.
Note: Please also note the safety information in this in-
struction manual and ensure that it is also observed when
operating the appliance using the Home Connect™ app.
15.1 Home Connect™ quick start
Connect your appliance to a mobile device quickly and
easily.
Installing the app
1.
Install the Home Connect™ app on your mobile device.
2.
Start the app and set up access for Home Connect™.
The Home Connect™ app will guide you through the
entire registration process.
Connecting appliance to the WLAN home network
(Wi-Fi)
Requirements
¡
Home Connect™ app is installed on your mobile device.
¡
Wi-Fi is activated on the router.
¡
The appliance receives signals from the WLAN home
network (Wi-Fi) at its installation location.
1.
Scan the QR code using the Home Connect™ app.
2.
Follow the instructions in the Home Connect™ app.
15.2 Home Connect™ settings
Adapt Home Connect™ to your needs.
You can find the Home Connect™ settings in the basic
settings for your appliance. Which settings the display
shows will depend on whether Home Connect™ has been
set up and whether the appliance is connected to your
home network.
15.3 Remote start
You can use the Home Connect™ app to start the appli-
ance with your mobile device.
Tip: If you select Remote start
with the basic setting, the remote start function will be per-
manently activated and you can start your appliance with a
mobile device at any time.
1
Wi-Fi is a registered trade mark of the Wi-Fi Alliance.
