Gaggenau DF 290, Operating Instructions Manual

Page: 15 / 28

15
Adjusting the appliance
Switching on the appliance
Turn on the tap fully.
Switch on the appliance with the main switch
1
and, if required, top up with salt and rinse aid (see
chapters “Filling with salt”, “Filling with rinse aid”).
The main menu is then displayed.
Auto Wash
< >
After switching on the Main Menu shows the
programme “Auto Wash”.
Setting the Programme
From the programme “Auto Wash” in the Main Menu
you can select among the following programmes:
“Auto Super Wash” –
“Auto Wash” –
“Auto Delicate Wash” –
“Short Rinse” –
“Prerinse Only”.
Set the desired programme by using the buttons – or
+
3
.
The auto programmes “Auto Super Wash”, “Auto
Wash”, and “Auto Delicate Wash” automatically match
the programme to the amount and soil level of the
dishes. This keeps the energy and water consumption
as low as possible.
Using the following programme overview you can
select the appropriate programme for the type, amount,
and soil level of the dishes.