12
en-us
Installation Procedure
Connect Electrical Supply
CAUTION
Before installing, turn off at the service panel. Lock
service panel to prevent power from being turned
on accidentally.
CAUTION
To reduce the risk of electric shock and fire, do not
use a flexible power supply cord.
Refer to data plate for more information. See "Service" for
data plate location.
The branch-circuit breakers ampacity, the wire sizes and
the connections must conform to the requirements of the
National Electrical Code or Canadian Electrical Code and
all local codes and ordinances.
Attach flexible conduit to the junction box. Connect the
lead wires to the junction box supply wires in proper
phase:
ʑ
black (L1) to black
ʑ
red (L2) to red
ʑ
green or bare to ground
If the cooktop is installed and connected as specified
above, it will be completely grounded in compliance with
the National Electrical Code.
Check the Installation
CAUTION
Before you plug in an electrical cord or turn on
power supply, make sure all controls are in the OFF
position.
Remove everything from the cooktop surface including
stickers. Clean cooktop surface with cooktop cleaning
cream.
Switch on the circuit breaker.
Verify that elements function properly.
1
House power supply cord
2
Black wire
3
Junction box
4
Cooktop power supply cord
5
Grounded green or bare cable
6
Certified UL connector
7
Red wire
