en
Cookware test
28
2.
Touch repeatedly until the and settings
flash alternately.
a
lights up.
3.
Set the value to using the twist knob.
a
goes out on the control panel.
a
WiFi is deactivated.
Note:
The network settings are saved. When the WiFi
function is reactivated, the hob starts searching for a
connection to the saved network.
23.6 Disconnecting from the network
You can disconnect your hob from the network at any
time.
Note:
If your hob is disconnected from the network, it is
not possible to operate it using Home Connect.
1.
Open the basic setting .
2.
Touch repeatedly until the and settings
flash alternately.
a
lights up.
3.
Set the value to using the twist knob.
a
goes out on the control panel.
a
The appliance is disconnected from the WiFi.
23.7 Software update
Your appliance's software can be updated using the
software update function, e.g. for the purposes of op-
timisation, troubleshooting or security updates.
To do this, you must be a registered Home Con-
nect user, have installed the app on your mobile device
and be connected to the Home Connect server.
As soon as a software update is available, you will be
informed via the Home Connect app and will be able to
start the software update via the app. Once the update
has been successfully downloaded, you can start in-
stalling it via the Home Connect app if you are in your
WLAN home network (Wi-Fi). The Home Connect app
will inform you once installation is successful.
Notes
¡
You can continue to use your appliance as normal
while updates are downloading. Depending on your
personal settings in the app, software updates can
also be set to download automatically.
¡
We recommend that you install security updates as
soon as possible.
23.8 Remote diagnostics
Customer Service can use Remote Diagnostics to ac-
cess your appliance if you contact them, have your ap-
pliance connected to the Home Connect server and if
Remote Diagnostics is available in the country in which
you are using the appliance.
Tip:
For further information and details about the avail-
ability of Remote Diagnostics in your country, please
visit the service/support section of your local website:
www.home-connect.com
23.9 Data protection
Please see the information on data protection.
The first time your appliance is registered on a home
network connected to the Internet, your appliance will
transmit the following types of data to the
Home Connect server (initial registration):
¡
Unique appliance identification (consisting of appli-
ance codes as well as the MAC address of the Wi-Fi
communication module installed).
¡
Security certificate of the Wi-Fi communication mod-
ule (to ensure a secure data connection).
¡
The current software and hardware version of your
appliance.
¡
Status of any previous reset to factory settings.
This initial registration prepares the Home Connect
functions for use and is only required when you want to
use the Home Connect functions for the first time.
Note:
Please note that the Home Connect functions
can only be utilised with the Home Connect app. In-
formation on data protection can be retrieved in the
Home Connect app.
24 Cookware test
You can use this function to check the speed and qual-
ity of the cooking process depending on the cookware.
The result is a reference value and depends on the
properties of the cookware and the cooking zone being
used.
Note:
You can find more information about this function
and positioning of the cookware in
→
and
24.1 Checking the cookware
1.
At room temperature, place the cookware with ap-
prox. 200 ml water in the centre of the cooking zone
whose diameter best fits the diameter of the base of
the cookware.
2.
"Opening the basic settings menu", Page 25
.
3.
Select the setting.
4.
Touch the control panel.
a
flashes.
a
The function is activated.
a
After 10 seconds, the result for the quality and
speed of the cooking process appear in the display.
5.
Check the result using the overview of the
→
6.
To reactivate the function, if required, turn the twist
knob again.
Notes
¡
If the cooking zone is much smaller than the dia-
meter of the cookware, only the middle of the cook-
ware heats up. The cooking result is not optimum.
¡
The flexible cooking zone is set to function as a
single cooking zone; check only one item of cook-
ware.
