Transfer settings
en
17
Use just one item of cook-
ware on each cooking
zone.
11.3 Using the Flex cooking zone as two
independent cooking zones
▶
Use the Flex cooking zone as two independent
cooking zones.
→
11.4 Using the Flex cooking zone as a
single cooking zone
Requirement:
The cooking zones are connected.
"Connecting the two cooking zones", Page 17
▶
Use the entire cooking zone.
Connecting the two cooking zones
1.
Set down the cookware.
2.
Select one of the two cooking zones assigned to the
flexible cooking zone.
3.
Press .
a
lights up.
a
The Flex cooking zone is activated.
a
The heat setting lights up in the displays for both
cooking zones.
Notes
¡
If the two cooking zones are set to a different heat
setting before being linked, switch both cooking
zones to heat setting 0 on activation.
¡
If there is a cooking timer programmed for one
cooking zone, this will also be assigned to the
second cooking zone when the two are linked.
Changing the power level
1.
Select one of the two cooking zones assigned to the
flexible cooking zone.
2.
Use the control knob to change the heat setting,
use the twist knob to set it.
Adding new cookware
1.
Set down the new cookware.
a
If correctly positioned, cookware is detected and the
cooking zone is selected automatically.
a
flashes.
2.
Use the twist knob to confirm the setting within
90 seconds.
a
The displays stop flashing and the appliance heats
the cookware.
Notes
¡
If the displays continue to flash, check whether the
cookware is suitable for induction cooking.
¡
If you move cookware on the cooking zone that is
being used or lift it, the hob starts an automatic
search and the heat setting that was previously se-
lected is retained.
Separating the cooking zones
1.
Select one of the two cooking zones assigned to the
flexible cooking zone.
2.
Press .
a
lights up in the cooking zone display.
a
The Flex cooking zone is deactivated.
a
The two cooking zones operate as two independent
cooking zones.
Note:
If you switch off the cooking zone and switch it
back on again, the flexible cooking zone is switched
back to two independent cooking zones.
Transfer settings
12 Transfer settings
You can use this function to transfer the settings of one
cooking zone to another.
The Transfer settings function can also be used on the
flexible cooking zones.
You can find additional information on the correct posi-
tioning of cookware in
→
12.1 Activating Transfer settings
1.
Remove any cookware.
a
The display for the cooking zone starts flashing.
a
The cooking zone does not heat up.
2.
Set the cookware down on a flexible cooking zone
within the next 90 seconds.
Move the cookware to a cooking zone which is not
switched on, which has not yet been preset and on
which no other cookware has yet been placed.
a
The new cooking zone is detected.
a
lights up
a
The adopted power level flashes in the display.
3.
Use the twist knob to select the new cooking zone
within 90 seconds.
a
The settings have been transferred.
Note:
If the flex function is activated by moving an item
of cookware across the flexible cooking zone, the ap-
pliance automatically applies the settings.
