20
en
Basic settings
Basic settings
Basic settings
Your appliance can be individually adjusted in the basic
settings.
1
Turn the function selector to
S
.
2
Select "Basic settings" using the rotary selector.
3
Touch the
™
symbol.
4
Turn the rotary selector to select the required basic
setting.
5
Touch the
%
symbol.
6
Set the basic setting using the rotary selector.
7
Save with
™
or cancel with
'
and exit the current
basic setting.
8
Turn the function selector to
0
to exit the basic
settings menu.
The changes are saved.
Basic setting
Permitted settings
Explanation
Brightness
Level 1, 2, 3, 4, 5*, 6, 7, 8
Sets the display brightness
Hibernate mode
with logo*/without logo
Hibernate mode display with or without
GAGGENAU logo
Display
Reduced*/Standard
If the 'Reduced' setting has been selected,
only the most important information will be
shown on the display after a short time.
Touch field colour
Grey* / White
Selects the colour of the symbols on the
touch fields
Touch field tone
Tone 1* / Tone 2 / Off
Selects an audible signal for when a touch
field is touched
Touch field tone vol-
ume
Level 1, 2, 3, 4, 5*, 6, 7, 8
Sets the volume of the touch field tone
Signal volume
Level 1, 2, 3, 4, 5*, 6, 7, 8
Sets the volume of the audible signal
Light settings
Lighting options 1*-7
Û
Light off
Ú
Light on
~
Light only on when a beverage is being
dispensed
Other setting options will appear if you
touch the
%
symbol.
Standby after
5 minutes - 12 hours
Setting for the time after which the appli-
ance automatically rinses and switches to
standby mode.
Water hardness
1-4*, softening device
Briefly immerse the enclosed test strip in
fresh tap water, leave it to drip and read off
the result after one minute. Set the meas-
ured water hardness.
Water filter
Available/not available*
Available: Operating the appliance with a
water filter.
Not available: Operating the appliance with-
out a water filter.
Temperature format
°C* / °F
Sets the temperature unit
Capacity unit
ml/fl.oz.*
Set the capacity unit
