background image

15

 Preparing beverages      

en

Preparing coffee using ground coffee

The appliance must be switched on and the water tank 
must be filled.

Important: 

Remove cups or glasses before opening the 

door as they may otherwise fall off.

1

Turn the function selector to position 2.

2

Open the door.

3

Using the measuring spoon, fill a maximum of two 
level spoonfuls of ground coffee into the ground 
coffee drawer. Close the ground coffee drawer.

Note: 

Do not fill the drawer with beans or instant 

coffee.

4

Close the door.

5

Use the rotary selector to select the desired 
beverage (beverages made from ground coffee are 
identified with the 

x

 symbol).

6

Place a cup under the coffee dispenser.

7

Touch the 

C

 symbol.

8

Set the quantity using the rotary selector.

9

Touch the 

C

 symbol.

10

Set the temperature using the rotary selector.

11

Confirm the settings using 

.

12

Press 

I

 to start.

The beverage is brewed and then runs into the cup. To 
prepare another cup, refill with ground coffee and 
repeat the process.

Notes

While the beverage is dispensed, the 

&

 symbol is 

displayed. Touch this symbol to stop the beverage 
being prepared.

If coffee is not dispensed within 90 seconds, the 
brewing chamber empties itself automatically to 
prevent an overflow.

The Aroma function is unavailable when using 
ground coffee. Similarly, it is not possible to 
dispense two cups at once when using ground 
coffee.

Preparing a coffee with milk

m

Warning – Risk of burns! 

The milk system becomes very hot. After use, allow it to 
cool down first before touching it.

You can decant the milk into the milk container supplied 
or fill e.g. into a milk jug or use the milk directly from the 
carton. 

~

 "Setting the milk container weight" 

on page 22

Important: 

Remove cups or glasses before opening the 

door as they may otherwise fall off.

Using the milk container:

Open the door.

Push the beverage dispenser down completely.

Remove the cover of the beverage dispenser 
towards the front.

Attach a milk hose from the milk system to the 
beverage dispenser and feed it outwards through 
the opening at the top.

Attach the connecting element of the milk system to 
the magnetic holder (on the inside of the 
appliance).

Place the filled milk container on the right next to 
the coffee dispenser. Connect the milk tube to the 
milk hose and then guide the milk tube into the milk 
container. The end of the milk tube must be 
immersed in the milk.

Close the door.

Summary of Contents for CMP250111

































Reviews: