background image

3

9

IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS

IMPORTANT: The appliance must be 

installed by a qualified installer. 

INSTALLER: leave these instructions with 
this unit for the owner. Show the owner 
the location of the circuit breaker or fuse. 
Mark it for easy reference.

OWNER: Please retain these instructions 
for future reference.

9

WARNING

If the information in this manual is 
not followed exactly, fire or shock 
may result causing property damage 
or personal injury.

9

WARNING

Do not repair, replace or remove any 
part of the appliance unless 
specifically recommended in the 
manuals. Improper installation, 
service or maintenance can cause 
injury or property damage. Refer to 
this manual for guidance. All other 
servicing should be done by an 
authorized servicer.

Remove all tape and packaging before 
using the appliance. Destroy the 
packaging after unpacking the appliance. 
Never allow children to play with 
packaging material. 

Hidden surfaces may have sharp edges. 
Use caution when reaching behind or 
under appliance.

This appliance is intended for use up to a 
maximum height of 13,100 feet 
(4,000 meters) above sea level.

Improper installation is not covered by 
the warranty.

9

WARNING

Wearers of electronic implants!

The appliance may contain 
permanent magnets which may affect 
electronic implants, e.g. heart 
pacemakers or insulin pumps. 
Therefore, during installation, 
wearers of electronic implants must 
maintain a minimum distance of 
4 inch (10 cm) from the appliance. 

Safety Codes and Standards

This appliance complies with one or more 
of the following Standards:

UL 858, The Standard for the Safety of 
Household Electric Ranges

UL 507, The Standard for the Safety of 
Electric Fans

CAN/CSA-C22.2

 

No. 113-M1984

 

Fans and 

Ventilators

CAN/CSA-C22.2

 

No. 61-M89

 

Household 

Cooking Ranges

It is the responsibility of the owner and 
the installer to determine if additional 
requirements and/or standards apply to 
specific installations.

Summary of Contents for CI 292 601













Reviews: