background image

Familiarizing yourself with your appliance

 en-us

11

Familiarizing yourself with your appliance

5 Familiarizing yourself with your ap-

pliance

Familiarizing yourself with your appliance

5.1 Control panel

You can use the control panel to configure all functions of

your appliance and to obtain information about the operat-

ing status.

The control panel image is representative. Your appliance

may vary slightly.

Touch keys

Touch keys are touch sensitive areas. Touch a symbol to

activate the corresponding function.

¡

When the cooktop is turned on, the touch keys for the

function that can currently be selected light up in white.

Once a function is selected the touch key lights up in or-

ange.

¡

When you press a touch key, the respective function is

activated. A confirmation signal sounds.

Touch key

Function
Main switch
Booster function for pots
Booster function for pans
Cooking sensor function
Frying sensor function
Flex flexible cooking zone
Short-term timer
Stopwatch
Keep warm function
Home Connect™ confirmation key
Hood control function
Hood light control
Basic settings

Notes

¡

Keep the controls clean and dry. Moisture can impair

the function of the controls.

¡

Do not place cookware close to the displays and sen-

sors. The electronics may overheat.

Displays

The displays show active settings and functions.

When you select a cooking zone, the settings for this

cooking zone light up orange.

Display

Name

⁠.

Cooktop ready
Cooking zone rear left
Cooking zone front left
Cooking zone rear right
Cooking zone front right

 - 

Power levels

Residual heat indicator
Booster function for pots
Booster function for pans
Cooking sensor function active
Frying sensor active
Short-term timer value

⁠ ⁠.

Stopwatch value
Keep warm function active

Display cleaning protection active
Panel lock active
Wi-Fi

,  ,  ,  ,

,  , 

Fan levels

Transfer function active

5.2 Residual heat indicator

The cooktop is equipped with a residual heat indicator for

each cooking zone. The residual heat indicator lights up

when a cooking zone is turned off. Do not touch the cook-

ing zone when the residual heat indicator lights up.

Display

Meaning
The cooking zone is hot.
The cooking zone is warm.

If you remove the cookware from the cooking zone during

cooking, the residual heat indicator and the selected

power level flash alternately.

Summary of Contents for CI 282 602

















































Reviews: