background image

3

       

en

Intended use

Read these instructions carefully. You will only 
be able to use your appliance safely and 
effectively when you have read them. These 
operating and installation instructions should 
be retained, and passed onto the buyer if the 
appliance is sold.

Removal of transit protection 
Packaging materials of the product are 
manufactured from recyclable materials. Do not 
dispose of the packaging materials together 
with the domestic or other wastes. Take them to 
the packaging material collection points 
designated by the local Authorities.

The manufacturer is exempt from all 
responsibility if the requirements of this 
manual are not complied with.

The images shown in these instructions are for 
guidance only.

Do not remove the appliance from its protective 
packaging until it is installed in the unit. Do not 
switch on the appliance if it is damaged in any 
way. Contact our Technical Assistance Service.

Before installing your new hob, ensure that it is 
being installed according to the installation 
instructions.

This appliance is not suitable for use in a 
marine craft, caravan or mobile home.

This appliance must only be used in well 
ventilated places. It must not be connected to a 
combustion product removal device.

This appliance is not intended for operation 
with an external clock timer or a remote control.

This appliance has been designed for home 
use only, not for commercial or professional 
use. This appliance is only intended for 
cooking purposes, not as a heating system. 
The warranty will only be valid if the appliance 
is used for the purpose for which it was 
designed.

This appliance is intended for use up to a 
maximum height of 2000 metres above sea 
level.

Do not use lids or hob guards for children 
which are not recommended by the hob 
manufacturer. They may cause accidents such 
as those due to the overheating, ignition or 
detachment of fragments of materials.

This appliance is not intended for use by 
persons (including children) with reduced 
physical, sensory or mental capabilities, or lack 
of experience and knowledge, unless they have 
been given supervision or instruction 
concerning use of the appliance by a person 
responsible for their safety. Children should be 
supervised to ensure that they do not play with 
the appliance.

All operations relating to installation, 
connection, regulation and conversion to 
other gas types must be performed by an 
authorised technician, respecting all 
applicable regulations, standards and the 
specifications of the local gas and electricity 
suppliers. Special attention shall be paid to 
ventilation regulations.

This appliance leaves the factory set to the gas 
type that is indicated on the specifications 
plate. If this needs to be changed, please 
consult the assembly instructions. It is 
recommended you contact the Technical 
Assistance Service to change to another gas 
type.

Before installing, you need to check that local 
distribution conditions are compatible with the 
appliance's adjustment indicated on the 
specifications plate (gas type and pressure, 
power, voltage).

Before you begin, turn off the appliance's 
electricity and gas supply.

The supply cable must be attached to the unit 
to prevent it from touching hot parts of the oven 
or hob.

Summary of Contents for CG261210AU





















Reviews: