background image

22

The temperature of the cooking zones is controlled

by switching the heat on and off, this means that it

is not always possible to see the red, glowing heat.

If you select a low heat setting, the heat will switch

off more often than at higher heat settings. Even at

the highest setting the heat switches on and off.
There may be a gentle buzzing as the cooking zones

heat up.
The heat may show differently on the individual

cooking zones. Depending on the angle of vision,

the heat may appear to spread beyond the marked

boundary of the cooking zone. These are technical

features and do not influence quality or function.

If the appliance does not function correctly, check

the household fuses first. If the power supply is

functioning correctly, please contact your dealer or

the Gaggenau after-sales service. 
Please quote the E number (product number) and

the FD number (production number) of your

appliance when contacting the after-sales service.

The quality control slip bearing these numbers is

included with this manual. This quality control slip

should be kept, for guarantee reasons, together

with your operating and assembly instructions.
Repairs may only be carried out by authorised

technicians, in order to guarantee the safety of the

appliance. 

m

Caution! Incorrect repairs may result in

serious injury to the user.

All poles of the appliance must be disconnected

from the mains when being repaired (switch off the

household fuse or the circuit breaker in the fuse

box).
Non compliance with these recommendations

results in the warranty coverage becoming invalid.

Useful hints

Maintenance

Summary of Contents for CE 492

























Reviews: