Gaggenau CE 490 Instruction Manual Download Page 5

Remove the packaging from the appliance and 
dispose of it according to local regulations. 
Be careful to remove all accessories from the 
packaging. Keep packaging elements and plastic
bags away from children.

Check the cooktop for transport  damage after
unpacking it. Do not connect the cooktop if it has
been damaged.

The cooktop must be installed and connected by an
authorised specialist. No warranty claims can be
lodged for any damage resulting from incorrect
connection. Observe the installation instructions.

This appliance is labelled in accordance
with the European Directive 2002/96/EG
concerning used electrical and electronic
appliances (waste electrical and electronic
equipment – WEEE). The guideline

determines the framework for the return and
recycling of used appliances as applicable.

Thoroughly clean the appliance before using it for
the first time. This will eliminate any ‘newness’
smells and soiling. 

Pots and pans

Rough pan bases scratch the glass ceramic. 

Avoid cooking on the cooktop with an empty pan,
especially with enamel or aluminium pans. This
could cause damage to the pan base and the glass
ceramic.

Do not place hot pots or pans on the control panel,
display area or the frame. This could cause
damage. 

Never heat food in aluminium foil or plastic
containers. The material can melt and damage your
cooktop.

Iridiscent discoloration can be caused by the bases
of some pans. These do not interfere with the
operation of the glass ceramic cooktop. Remove the
discoloration with glass ceramic cleaner.

Food spills

Milk, sugar and food with a high sugar content
(e.g. jam) damage the glass ceramic surface.
Remove food spills immediately with the glass
scraper. Caution! The glass scraper has a sharp
blade.

Scratches on the glass ceramic

Always keep the cooktop dry and clean. Salt, sugar
and sand cause scratches on the glass ceramic. Do
not use the cooktop as a work surface or storage
space.

Hard and pointed objects

Damage can occur if hard or pointed objects fall on
the cooktop. Do not store such objects above the
cooktop.

Removable twist knob

Do not place the magnetic knob on the cooking
zones. It could be damaged.

Metal parts attached to the underside of the
magnetic knob could scratch the glass ceramic
surface. Always keep the knob clean.

5

Operating for the first time

Causes of damage

Summary of Contents for CE 490

























Reviews: