38
en-us
Pyrolysis (self-cleaning)
Microfiber cloth
The honeycomb microfiber cloth is particularly suitable
for cleaning sensitive surfaces such as glass, glass
ceramic, stainless steel or aluminum (product no.
00460770, also available from our online online shop). It
removes liquid and greasy deposits in one go.
Removing the plug-in grid
The plug-in grids can be removed for cleaning.
Removing the plug-in grids
1.
Put a dish towel in the cooking compartment to
protect the enamel from scratches.
2.
Loosen the knurled screws (Figure A).
3.
Remove the plug-in grids (Figure B).
You can clean the plug-in grids in the dishwasher.
Hooking in the plug-in grids
1.
Attach the plug-in grids all around: longer side toward
the top. The right and left grids are identical.
2.
Tighten the knurled screws.
.
Pyrolysis (self-cleaning)
Pyrolysis (self-cleaning)
During self-clean (pyrolysis), the oven heats up to 905°F
(485°C). Thus, remainders from roasting, grilling or
baking are burnt up and all you have to do is wipe the ash
out of the interior.
Self-clean (pyrolysis) takes three hours. You can move the
self-clean switch-off time (for example, if you would like it
to run at night).
9
WARNING
During the elimination of soil during self-cleaning,
small amounts of Carbon Monoxide can be created
and the fiberglass insulation could give off very
small amounts of formaldehyde during the first
several cleaning cycles. To minimize exposure to
these substances, provide good ventilation with an
open window, or use a ventilation fan or hood.
Wipe out excessive spillage before self-cleaning the
oven.
9
WARNING
Risk of fire!
Food remainders, grease or roast juice can catch
fire during pyrolytic self-cleaning. Before every
pyrolytic self-cleaning, remove coarse soiling from
the oven interior and from accessories.
9
WARNING
Risk of fire!
The appliance becomes very hot during pyrolytic
self-cleaning. Never hang flammable items such as
dishcloths on the door handle. Keep the front of
the appliance clear. Keep children away.
9
WARNING
Severe health risk!
The appliance becomes very hot during pyrolytic
self-cleaning. The non-stick coatings on trays and
forms are destroyed and toxic gases are produced.
Never leave trays and forms with non-stick coatings
in the oven during pyrolytic self-cleaning. Only
leave enameled accessories in oven during self-
clean cycle.
Plug-in grids
Dishwasher, see section
Rotary spit
(not available
with all oven
models)
Hot soapy water: Clean with a dish
cloth or brush.
Do not soak or clean the rotary spit
drive in the dishwasher.
Telescopic
shelf
(Optional
accessory)
Hot soapy water: Clean with a dish
cloth or brush.
Do not soak or clean in the dish-
washer.
Baking stone
(Optional
accessory)
Clean burnt-on residues with a brush.
Never clean the baking stone when it is
wet.
Roasting dish
(Optional
accessory)
Hot soapy water: Soak and clean with a
dish cloth or brush.
Do not clean the roasting dish in the
dishwasher.
Area
Cleaning agent
$
%
