18
en
Long-term timer
F
Long-term timer
Long-term timer
With the appliance in hot air mode, this function keeps
the temperature between 50
and 230
°C.
You can keep food warm for up to 74
hours without
having to switch the appliance on and off.
Bear in mind that food which spoils easily should not be
left in the oven for too long.
Note: To use the long-term timer, you will need to set it
to "available" in the basic settings.
~
"Basic settings"
on page 29
Setting the long-term timer
1
Set the function selector to
ž
.
2
Touch the
/
symbol.
The default value 24
hrs at 85
°C appears in the
display. Press
I
to start
–or–
Change the cooking time, the cooking time end, the
switch-off date and the temperature.
3
Changing the cooking time
6
:
Touch the
$
symbol. Set the required cooking
time using the rotary selector.
4
Changing the cooking time end
5
:
Touch the
C
symbol. Set the required cooking
time end using the rotary selector.
5
Changing the switch-off date
q
:
Touch the
C
symbol. Set the required switch-off
date with the rotary selector. Confirm with
™
.
6
Changing the temperature:
Set the required temperature with the rotary
selector.
7
Press
I
to start.
The appliance starts.
/
and the temperature appear in
the display.
The oven and display lighting are switched off. The
control panel is locked; no key tone sounds when you
touch the touch keys.
Once the set time has elapsed, the appliance stops
heating. Turn the function selector to 0.
Switching off:
To end the process, turn the function selector to 0.
n
Automatic programmes
Automatic programmes
You can prepare a wide range of food using the
automatic programmes. The appliance will choose the
optimal setting for you.
To achieve good results, the cooking compartment must
not be too hot for the type of food you have selected. If
it is, a message will appear on the display. Allow the
appliance to cool and then try again.
Information on the settings
▯
The cooking result depends on the quality of the
food and the size and type of cookware. For an
optimal cooking result, only use food that is in good
condition and meat that is chilled to refrigerator
temperature. For frozen food, only use food straight
out of the freezer.
▯
The automatic programme suggests a temperature,
type of heating and cooking time.
▯
For some dishes, you will be required to enter the
weight. It is not possible to set weights outside the
preprogrammed weight range.
▯
For some dishes, you will be asked to enter desired
level of browning, the thickness of the food and/or
the cooking level of the meat or vegetables.
▯
For some dishes, the cooking compartment is
preheated empty. Place the food in the cooking
compartment once the preheating is complete and
a message appears in the display.
▯
Your preferred settings will be shown next time as a
suggestion.
Core temperature probe
For some recipes, you will need the core temperature
probe. Use the core temperature probe for these
recipes.
~
"Core temperature probe" on page 22
Selecting a dish
The following categories are available. One or more
dishes are listed beside each category.
Categories:
▯
Vegetables
▯
Oven dishes
▯
Fish
▯
Meat and poultry
▯
Bread, pizza and cake
▯
Drying
▯
Dough mixture
/RQJWHUPWLPHU
19
Automatic programmes
en
Applying settings for a dish
You are guided through the entire setting process.
Follow the instructions in the display.
Use the rotary selector to scroll through the individual
levels.
1
Set the function selector to
ž
.
2
Touch the
i
symbol. Press
™
to confirm.
3
Use the rotary selector to select the category and
press
™
to confirm.
4
Use the rotary selector to select the required dish
and press
™
to confirm.
The possible settings appear in the display. For
many dishes, you can change the settings to suit
your needs.
For some dishes, you must set the weight.
Tip: By pressing the
*
symbol, you can receive
information about accessories and preparation
methods.
5
Press
™
to confirm the required settings. Follow
the directions in the display.
Once the cooking time has elapsed, an audible signal
sounds. The appliance stops heating.
m
Warning – Risk of scalding!
When you open the appliance door, hot steam may
escape. Open the appliance door with care. Keep
children at a safe distance.
Opening the appliance door affects the cooking result.
Open the appliance door only briefly. The automatic
programme is interrupted and continues to run after
closing the appliance door.
Adding extra cooking time
After the cooking time has ended, you can leave some
dishes to continue cooking if you are not satisfied with
the cooking result.
A query appears in the display asking if you want to
continue cooking.
1
Press
™
to confirm.
2
Select a single or double cooking time, depending
on requirements.
3
Press
I
to start.
4
If the "Continue cooking" function has ended, turn
the function selector to 0.
Changing and cancelling
After starting the appliance, the settings can no longer
be changed.
If you want to cancel the operation, turn the function
selector to 0.
Calling up the last automatic
programmes used
The last five dishes with the selected settings are saved.
You have the option of saving these dishes with the
selected settings as individual recipes. You can no
longer retroactively change the settings of individual
recipes if you have not saved it using the "Last
automatic programmes" function.
~
"Individual recipes"
on page 20
1
Set the function selector to
ž
.
i
is displayed.
2
Touch the
i
symbol.
3
Use the rotary selector to select "Last automatic
programmes" and press
™
to confirm.
4
Use the rotary selector to select the required dish
and press
™
to confirm.
5
Enter a name for the dish and save.
~
"Entering
names" on page 21
