26
en
Home Connect
If the display shows "Network connection successful",
the connection process is complete. Follow the
instructions in the app.
Connecting the appliance to the app
Connect your appliance to the app when setting up
Home Connect or connect your appliance to an
additional Home Connect account. The Home Connect
app can be installed on any number of mobile devices,
which can then be connected to the appliance.
Requirements:
▯
The appliance is connected to the home network.
▯
The Home Connect app has been installed on the
mobile device.
1
To connect an additional account, select "Home
Connect" in the basic settings.
2
Use the rotary selector to select "Connect to app".
3
Touch the
%
symbol and start the connection
process with
™
.
4
Follow the instructions in the app.
If the display shows "Connection to app successful", the
connection process is complete.
Remote Start
Remote start must be activated in order to start and
operate your appliance via the Home Connect app. If
remote start is deactivated, the Home Connect app will
only show the operating modes of the appliance and let
you configure the settings.
Remote start is automatically deactivated in the
following situations:
▯
The appliance door is opened at least 15 minutes
after remote start has been activated.
▯
The appliance door is opened at least 15 minutes
after operation has ended.
▯
24 hours after remote start has been activated.
When you start a type of heating using the controls on
the appliance, remote start is activated automatically.
You can now make changes or start a new programme
from your mobile device.
Activating remote start
1
Set the function selector to
ž
2
Touch the
×
symbol.
The symbol
×
appears next to the
(
symbol.
Remote start is activated. You can now start a heating
mode via the app on the mobile device and send the
desired settings to the appliance.
Touch the
í
symbol to deactivate remote start.
Home Connect settings
Home Connect can be adapted to your specific needs at
any time.
Note:
You will find the Home Connect settings in the
basic settings for your appliance. Which settings the
display shows will depend on whether Home Connect
has been set up and whether the appliance is
connected to your home network.
Basic setting
Permitted settings
Explanation
Connection type
LAN/Wi-Fi
You can switch between connection types (LAN cable and
Wi-Fi).
Follow the instructions for setting up the relevant connection
type.
~
"Setting up" on page 25
Connecting
Connect/disconnect
Switch the network connection on or off as required (e.g. for
holiday).
Network information is retained after the appliance is
switched off.After switching on the appliance, you will need
to wait for a few seconds while it reconnects to the network.
In networked standby mode, the appliance requires max. 2 W.
Connect to app
Start the connection process between the app and the appli-
ance.
Software update
As soon as a new software version is available, a message
appears in the display. You can install the new software in the
Home Connect menu
Í
.
27
Home Connect
en
Remote diagnostics
Customer Service can use Remote Diagnostics to
access your appliance if you contact them, have your
appliance connected to the Home Connect server and if
Remote Diagnostics is available in the country in which
you are using the appliance.
Note:
For further information and details about the
availability of Remote Diagnostics in your country,
please visit the service/support section of your local
website: www.home-connect.com
About data protection
When your appliance is connected for the first time to a
WLAN network, which is connected to the Internet, your
appliance transmits the following categories of data to
the Home Connect server (initial registration):
▯
Unique appliance identification (consisting of
appliance codes as well as the MAC address of the
installed WiFi communication module).
▯
Security certificate of the WiFi communication
module (to ensure a secure IT connection).
▯
The current software and hardware version of your
domestic appliance.
▯
Status of any previous resetting to factory settings.
This initial registration prepares the Home Connect
functions for use and is only required when you want to
use these Home Connect functions for the first time.
Note:
Ensure that the Home Connect functions can be
used only in conjunction with the Home Connect app.
Information on data protection can be accessed in the
Home Connect app.
Remote control
Activate/deactivate
Access the appliance's functions via the Home Connect app.
When deactivated, only the appliance's operating statuses
will be displayed in the app.
Delete network set-
tings
All network settings can be deleted from the appliance at any
time.
Appliance information
The display shows:
▯
MAC address COM module
▯
Serial number of the appliance
▯
Software version
You can view more information – such as the SSID (network
name), although this depends on the connection type – by
touching the arrow button.
Declaration of Conformity
BSH
Hausgeräte GmbH hereby declares that the
appliance which features Home Connect is in
accordance with the basic requirements and the other
relevant provisions of the directive 2014/53/EU.
A detailed RED Declaration of Conformity can be found
online at www.gaggenau.com on the product page for
appliance in the additional documents.
Hereby, BSH Hausgeräte GmbH declares that the ap-
pliance with Home Connect functionality is in compli-
ance with relevant statutory requirements.
1
A detailed Declaration of Conformity can be found on-
line at www.gaggenau.com/gb among the additional
documents on the product page for your appliance.
1
Only applies to Great Britain
2.4 GHz band (2400–2483.5 MHz): Max. 100 mW
5 GHz band (5150–5350 MHz + 5470–5725 MHz):
Max. 100 mW
BE
BG
CZ
DK
DE
EE
IE
EL
ES
FR
HR
IT
CY
LI
LV
LT
LU
HU
MT
NL
AT
PL
PT
RO
SI
SK
FI
SE
NO
CH
TR
IS
UK (NI)
5 GHz WLAN (Wi-Fi): For indoor use only.
AL
BA
MD
ME
MK
RS
UK
UA
5 GHz WLAN (Wi-Fi): For indoor use only.
1
Only applies to Great Britain
