Gaggenau BMP 250, User Manual And Installation Instructiions

Page: 19 / 44

Childproof lock
en
19
15.3 Stopwatch
The stopwatch only runs if you have not set any other
function. The stopwatch counts upwards from
0 seconds up to 90 minutes.
You can use the pause function to pause the stop-
watch occasionally.
Starting the stopwatch
1.
Press ⁠.
2.
Use to select "Stopwatch" ⁠.
3.
Press to start.
a
The appliance closes the timer menu and the time
counts down.
a
The display shows and the time that has elapsed.
Stopping the stopwatch
1.
Press ⁠.
2.
Use to select "Stopwatch" ⁠.
3.
Press ⁠.
a
The time stops and the symbol switches to start ⁠.
4.
Press to start the stopwatch.
a
The time continues to run. Once it has reached
90 minutes, the display pulses and a signal tone
sounds. If you press , you can end the signal.
a
goes out on the display and the procedure is
ended.
Switching off the stopwatch
1.
Press ⁠.
2.
Use to select "Stopwatch" ⁠.
3.
Press ⁠.
15.4 Long-term timer
With this function, your appliance with the Hot air type
of heating retains a temperature of 85 °C.
You can keep food warm for up to 74 hours without
having to switch the appliance on or off.
Do not leave food which spoils easily in the oven for
too long.
Notes
¡
To use the long-term timer, you must set it to "avail-
able" in the basic settings.
→
"Basic settings", Page 19
¡
If the short-term timer or the stopwatch is activated,
you cannot select the long-term timer.
Setting the long-term timer
1.
Set the function selector to ⁠.
2.
Press ⁠.
a
The display shows the default value "24h" at 85 °C.
3.
Press ⁠.
4.
Use the rotary selector to set the required cooking
time ⁠.
5.
Press to confirm.
6.
Press to start.
a
The appliance starts and the display shows and
the temperature.
a
The oven lighting and the display lighting are
switched off.
a
The control panel is locked and the touch-key tones
are deactivated.
a When the time has elapsed, the appliance no longer
heats up. Turn the function selector to ⁠.
Switching off the long-term timer
▶
To cancel the transaction, turn the function selector
to ⁠.
16
Childproof lock
You can secure your appliance to prevent children
from accidentally switching it on or changing the set-
tings.
16.1 Activating the childproof lock
Requirements
¡
The childproof lock is set to "Available" in the basic
settings.
¡
The function selector is set to ⁠.
▶
Press and hold for approx. 6 seconds.
a
The standby display appears and the display shows
⁠.
Note:
If there is a power cut after the childproof lock
has been activated, the childproof lock may be deactiv-
ated when the power comes back on.
16.2 Deactivating the childproof lock
Requirement:
The function selector is set to ⁠.
▶
Press and hold for approx. 6 seconds.
17
Basic settings
You can configure the basic settings for your appliance to meet your needs.
17.1 Overview of the basic settings
Here you can find an overview of the basic settings and factory settings. The basic settings depend on the features
of your appliance.