Gaggenau BMP 250/251, Instruction Manual

Page: 25 / 44

25
Basic settings
Your appliance can be individually adjusted in the basic
settings.
1 Set the function selector to S .
You are in the "Basic settings" menu.
2 Turn the rotary selector to select the required basic
setting.
3 Touch the
%
symbol.
4 Set the basic setting using the rotary selector.
5 Press
™
to save or press
'
to cancel and exit the
current basic setting.
6 Set the function selector to 0 to exit the basic
settings menu.
The changes are saved.
Basic setting Permitted settings Explanation
Brightness Level 1, 2, 3, 4, 5*, 6, 7, 8 Sets the display brightness
Standby screen On*/Off
- Clock
- Clock + GAGGENAU logo*
- Date
- Date + GAGGENAU logo
- Clock + date
- Clock + date + GAGGENAU logo
Appearance of the standby screen.
Off: No display. Use this setting to reduce the
standby consumption of your appliance.
On: Several displays can be set, confirm "On"
with
™
and use the rotary selector to select
the desired display.
The selection is displayed.
Display Reduced*/Standard If the 'Reduced' setting has been selected,
only the most important information will be
shown on the display after a short time.
Touch field colour Grey* / White Selects the colour of the symbols on the
touch fields
Touch field tone Tone 1* / Tone 2 / Off Selects an audible signal for when a touch
field is touched
Touch field tone volume Level 1, 2, 3, 4, 5*, 6, 7, 8 Sets the volume of the touch field tone
Signal volume Level 1, 2, 3, 4, 5*, 6, 7, 8 Sets the volume of the audible signal
Heating-up time/audi-
ble signal Heating up with audible signal*
Rapid heat-up with audible signal
Heating up without audible signal
Rapid heat-up without audible signal
With the heating-up function, the audible sig-
nal sounds when the desired temperature is
reached. With the "Rapid heat-up" function,
the desired temperature is reached particu-
larly quickly.
Time format AM/PM / 24 h* Display the clock in 24 or 12 ­ hour format
Time Current time Setting the clock
Clock change Manual* / Automatic Automatically changes the clock to daylight-
savings time. If automatic: Setting the month,
day and week for when the time should be
changed over. To be set for both summer and
winter time.
Date format D.M.Y*
D/M/Y
M/D/Y
Sets the date format