Gaggenau AW 25, Instructions For Installation And Use Manual

Page: 11 / 88

11
Home Connect
en
o
Home Connect
Home Connect
This appliance is Wi-Fi-capable and can be controlled
using a mobile device.
If the appliance is not connected to your home network,
it will function as an extractor hood with no network
connection and can still be operated via the display.
The availability of the Home Connect function depends
on the availability of Home Connect services in your
country. Home Connect services are not available in
every country.You can find more information on this at
www.home-connect.com.
Notes
– Ensure that you follow the safety instructions in this
instruction manual and that you comply with these
even when you are away from home and are
operating the appliance via the Home Connect app.
You must also follow the instructions in the
Home Connect app.
– If the appliance is being operated by means of the
controls on the appliance itself, this mode of
operation always has priority. During this time, it is
not possible to operate the appliance using the
Home Connect app.
Setting up
To implement settings via Home Connect, you must have
installed and set up the Home Connect app on your
mobile device.
Note: In networked standby mode, your appliance
requires a maximum of 2 W.
Setting up the Home Connect app
Note: Your mobile device must have the latest version of
the operating system it uses.
1 On your mobile device, open the App Store (Apple
devices) or Google Play store (Android devices).
2 Enter “Home Connect” in the search field.
3 Select the Home Connect app and install it on your
mobile device.
4 Start the app and create your Home Connect login
details. The app will guide you through the
registration process. Don't forget to make a note of
your e-mail address and password.
Automatic registration in the home network
Notes
– You require a router that has WPS functionality. You
will find information about this in the manual for
your router.
– You require access to your router. If you do not have
this, follow the steps for "Manually logging into your
home network".
– The extractor hood cannot be switched on during
the connection process. You can cancel the
process at any time by pressing the
#
symbol.
– To connect the extractor hood to your home
network, the hood and the light must be switched
off.
1 Press and hold the
·
symbol until it starts to flash.
2 Press "1" to start automatic login to your home
network.
The LED for fan setting 1 and the
·
symbol will
flash.
3 Press the WPS button on the router within the next
2 minutes.
If the extractor hood has successfully connected, it
will automatically connect to the Home Connect
app. The LED for fan setting 3 and the
·
symbol
will flash.
Note: If the extractor hood has been unable to
connect, it will automatically allow you to manually
connect to your home network. The LED for fan
setting 2 and the
·
symbol will flash. Log the
appliance into your home network manually or press
"1" to try logging in automatically again.
4 On your mobile device, follow the instructions for
automatic network login.
The login process is complete when the
·
symbol stops
flashing on the control panel and remains continuously
lit.
Manual registration in the home network
Notes
– The extractor hood cannot be switched on during
the connection process. You can cancel the
process at any time by pressing the
#
symbol.
– To connect the extractor hood to your home
network, the hood and the light must be switched
off.
– To manually log into your home network (Wi-Fi), you
will need the network name (SSID) and password
(key).
1 Press and hold the
·
symbol until it starts to flash.
2 Press "2" to manually log into your home network.
The LED for fan setting 2 and the
·
symbol will
flash.