Installation
en
Attaching and aligning the appliance
1
First, remove the protective foil from the back of the
appliance and, following installation, remove the foil
completely.
2
:KHQ DWWDFKLQJ WKH DSSOLDQFH HQVXUH WKDW LW HQJDJHV
ILUPO\ZLWKWKHEUDFNHWV
«
3
$OLJQWKHDSSOLDQFHKRUL]RQWDOO\E\WXUQLQJWKH
EUDFNHWV,IUHTXLUHGWKHDSSOLDQFHFDQEHPRYHGWR
WKHULJKWRUOHIW
¬
4
)LUPO\WLJKWHQWKHVFUHZVIRUWKHEUDFNHWV:KHQ
GRLQJVRKROGWKHEUDFNHWVVHFXUHO\LQSODFH
®
5
)LUPO\WLJKWHQWKHNQXUOHGQXWV
¯
Connecting the pipes
Note: .
If using an aluminium pipe, smooth the connection area
beforehand.
Exhaust-air pipe Ø 150 mm (recommended size)
Attach the exhaust-air pipe directly to the air-pipe connector
and seal.
Exhaust-air pipe Ø 120 mm
1
Attach the reducing connector directly to the air-pipe
connector.
2
Attach the exhaust air pipe to the reducing connector.
3
Seal both joints appropriately.
Attaching the flue duct
m
Warning. Risk of injury!
Components inside the appliance may have sharp edges.
Wear protective gloves.
1
Separate the flue ducts.
To do this, remove the adhesive tape.
2
Remove the protective foil from both flue ducts.
3
Push one flue duct into the other.
Notes
–
To prevent scratches, lay paper over the edges of the
lower flue duct to protect the surface.
–
Slots of the inner flue duct point downwards.
4
Place flue ducts on the appliance.
5
3XVKWKHLQQHUIOXHGXFWXSZDUGVDQGDWWDFKLWWRWKH
IL[LQJEUDFNHWVRQWKHOHIWDQGULJKW
¨
6
3UHVVWKHIOXHGXFWGRZQZDUGVXQWLOLWHQJDJHV
©
7
6FUHZWKHIOXHGXFWWRWKHVLGHVRIWKHIL[LQJEUDFNHW
XVLQJWZRVFUHZV
ª
'
(
)
*
[
$
%
&
