background image

2

Preface

With your new extractor hood, working in the

kitchen will be even more fun.

The appliance offers you a number of

advantages:

– a good extraction capacity with low noise

values,

– a large number of control functions,

– optimum illumination of the cooking surface by

a dimmable halogen light.

To ensure that you will be able to use this appli-
ance in all its diversity, read through the operating
and assembly instructions conscientiously 

before

operating it for the first time

. The instructions

contain 

important notes

on use, installation and

maintenance of the appliance.

On the following page you will find 

important

notes on safety

and 

operation

. These will serve

to ensure your personal safety and the lasting
value of your appliance.

You will find notes on page 4 that you ought to
observe 

before operating the appliance for

the first time

.

The chapters entitled 

“Structure and operating

principle” 

and 

“Operation”

will tell you all the

things your extractor hood is capable of doing
and how the appliance is operated.

Tips and hints in the chapter entitled  

“Cleaning

and care”

will make sure that your appliance will

stay operable and beautiful for a long time.

And now we wish you lots of fun with your

new extractor hood.

Fig. 1

Summary of Contents for AI 543-120





















Reviews: