50
en
Installation
5
Insert the on-site cable for the lighting.
6
Remove the grease filter.
Note:
Do not bend the grease filter to avoid
causing damage.
7
Open the odour filter cartridge.
8
Unpack the odour filter.
9
Insert the odour filter.
Note:
Note the correct installation direction for the
odour filter.
10
Fit the grease filters.
11
Swing the filter cover up and ensure that it
engages.
Removing the appliance
m
Warning – Risk of injury!
Risk of trapping body parts when opening and closing
the hinges. Keep your hands away from the hinges.
m
Warning – Risk of injury!
Components inside the appliance may have sharp
edges. Wear protective gloves.
1
Cover the hob to protect it from damage.
2
Press the
Æ
button on the remote control.
The appliance moves down as far as it will go.
3
Place a scissor lift table or another suitable device
under the appliance.
4
Move the scissor lift table up until the tension on
the appliance cables is removed.
Notes
–
Place the appliance on the scissor lift table so
that the appliance and the frame are lying on it.
–
Do not place the appliance on the grease filters
as these could be damaged.
5
Disconnect the appliance from the power supply.
6
To protect against scratches, position a spacer on
the appliance.
7
Carefully loosen the screws on the frame cover.
Note:
Do not use any tools. Ensure that lock nuts
do not fall into the opening in the appliance, in
order to prevent damage to the limit switch.
8
Place the frame cover down carefully.
9
Open the cable cover at the side using a
screwdriver.
