Gaggenau AC231120, Instruction Manual

Page: 11 / 16

11
Trouble shooting
Malfunctions often have simple explanations. Please
read the following notes before calling the after-sales
service.
m
Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be
carried out and damaged power cables replaced by one
of our trained after-sales technicians. If the appliance is
defective, unplug the appliance from the mains or switch
off the circuit breaker in the fuse box. Contact the after-
sales service.
LED lights
Defective LED lights may be replaced by the
manufacturer, their after-sales service or a qualified
technician (electrician) only.
Fault table
--------
Replacing the batteries in the remote control
1 Push in the lug.
2 Remove the cover.
3 Remove the batteries.
4 Correctly insert the new batteries
(AAA/LR03/1.5 V).
Note: Dispose of flat or faulty batteries in accordance
with local regulations.
Note: Do not dispose of batteries along with general
household waste.
Problem Possible cause Solution
The appliance
does not work The plug is not
plugged into
the mains Connect the appliance to
the power supply
Power cut Check whether other
kitchen appliances are
working
The fuse is
faulty Check in the fuse box to
make sure that the fuse for
the appliance is in work-
ing order
The lighting
does not work. The LED lights
are defective. Call the after-sales ser-
vice.
The button illu-
mination does
not work. The control unit
is faulty. Call the after ­ sales ser-
vice.
The
ž
or
μ
button is
flashing on the
display panel
The grease fil-
ter or the acti-
vated charcoal
filter is satu-
rated. Clean the filter, or refresh
or replace the activated
charcoal filter; see the
section entitled
Cleaning
and maintenance
.