12
REV. 4/15
GB752 - SELECTION CHART
FASTENER
DIA.
*RIGHT ANGLE
1
3/16
LB06-722-20
LB06-722-60
1/4
LB08-722-20
LB08-722-60
3/16
MG06-722-20
MG06-722-60
1/4
MG08-722-20
MG08-722-60
1/8
SMLS04-752C-20
SMLS04-752C-45
5/32
SB05-752C-20
SB05-752C-45
SB05-751B-54RA
SB05-752A-43OS
SB05-752C-80
3/16
SB06-752B-20
SB06-752B-45
SB06-751B-54RA
SB06-204D-27OS
SB06-752B-80
EN6122 & UAB130-EU
EN6127 & UAB6127-EU
5/32
UBB05-752C-20
UBB05-752C-45
UBB05-751B-54RA
UBB05-752A-43OS
EN6128 & UAB100-EU
EN6129 & UABP-EU
3/16
UAB06-752B-20
UAB06-752B-45
UAB06-751B-54RA
UAB06-752A-43OS
EN6129 & UABP-EU
1/8
SMLS04-752C-20
SMLS04-752C-45
SMLS04-751B-54RA
SMLS04-752A-43OS
5/32
SMLS05-752C-20
SMLS05-752C-45
SMLS05-751B-54RA
SMLS05-752A-43OS
3/16
SMLS06-752B-20
SMLS06-752B-45
SMLS06-751B-54RA
SMLS06-752A-43OS
1/4
SMLS08-713-20
SMLS08-713-45
SMLS08-204D-27OS
3/32
3A-352B-25
3A-751B-54RA
1/8
4A-752C-20
4A-752C-45
4A-751B-54RA
4A-752A-43OS
5/32
5A-752C-20
5A-752C-45
5A-751B-54RA
5A-752A-43OS
3/16
6A-752B-20
6A-752B-45
6A-751B-54RA
6A-752A-43OS
1/4
SMLS08-713-20
SMLS08-204D-27OS
3/32
3NP-751-23
3NP-352-61
3NP-751B-54RA
3NP-751-43OS
1/8
5N-751-23
5N-352-61
45N-751B-54RA
5N-751-43OS
1/8
5/32
3/16
1/4
08MAX-752B-20
08MAX-752B-45
**08MAX-204D-27OS **08MAX-204D-37OS
ASP®
13/64
ASP06-752B-20
ASP06-752B-45
ASP06-751B-54RA
ASP06-752A-43OS
17/64
ASP08-752B-20
ASP08-752B-45
ASP08-752A-43OS
1/8
MBC04-752C-20
MBC04-752C-45
MBC04-751B-54RA
MBC04-752A-43OS
5/32
MBC05-752C-20
MBC05-752C-45
MBC05-751B-54RA
MBC05-752A-43OS
3/16
MBC06-752B-20
MBC06-752B-45
MBC06-751B-54RA
MBC06-752A-43OS
8/32
GS8-752B-20
GS8-752B-45
GS8-751B-54RA
GS8-752A-43OS
10/32
GS10-752B-20
GS10-752B-45
GS10-752A-54RA
GS10-752A-43OS
3/32
3N-751-23
3N-352-61
3N-751B-54RA
3N-751-43OS
1/8
4N-751-23
4N-352-61
45N-751B-54RA
4N-751-43OS
5/32
5N-751-23
5N-352-61
45N-751B-54RA
5N-751-43OS
3/16
6N-751-23
6N-352-61
6N-751C-54RA
6N-751-43OS
3/32
3N-751-23
3N-352-61
3N-751B-54RA
3N-751-43OS
1/8
4CEA-751-23
4CEA-352-61
45CEA-751B-54RA
4CEA-751-43OS
5/32
5CEA-751-23
5CEA-352-61
45CEA-751B-54RA
5CEA-751-43OS
3/16
6CEA-751-23
6CEA-352-61
6CEA-751C-54RA
6CEA-751-43OS
3/32
3N-751-23
3N-352-61
3N-751B-54RA
3N-751-43OS
1/8
4CES-751-23
4CES-352-61
45CES-751B-54RA
4CES-751-43OS
5/32
5CES-751-23
5CES-352-61
45CES-751B-54RA
5CES-751-43OS
3/16
6CES-751-23
6CES-352-61
6CES-751C-54RA
6CES-751-43OS
*ALL RIGHT ANGLE NOSES REQUIRE 752142 STROKE LIMITER.
**ALL OFFSET 204 SERIES NOSES REQUIRE 751204 ADAPTER.
1) RIGHT ANGLE NOSE ASSEMBLY'S MAY REQUIRE MORE THAN ONE PULL.
2) INSTALLS 1/8, 5/32 & 3/16 DIAMETERS
3) INSTALLS 5/32 & 3/16 DIAMETERS
COMMERCIAL LOCKBOLTS
MULTIGRIP LOCKBOLTS
BLIND BOLT (SINGLE ACTION)
WITH OR W/OUT DRIVE WASHER
MS90353S & U / MS90354S & U
MS21140S & U / MS21141S & U
CR7000 SERIES,
BACB30YY, YU, & YT
NOTE: THE LAST 2 DIGITS OF THE NOSE ASSEMBLY REPRESENTS THE LENGTH THE NOSE EXTENDS FROM THE TOOL I.E. -20 = 2.0 INCHES
OPEN END
NAIL RIVET
NUT PLATE RIVETS
CCR244/264/274
BACR15DR
MS20600
CHERRYMAX®,
CHERRYMAX® 'AB',
MBC® LOCK CREATOR
BACR15FR/FP, BACR15GF/GK,
NAS1900 S & U SERIES BLIND
RIVET WITH DRIVE WASHER
GROUND STUD,
M83454 & BACS53B
4
CLOSED END
NAIL RIVET
(STEEL MANDREL)
2
456MAX-751A-21
2
456MAX-751A-61
2
456MAX-751C-54RA
STRAIGHT
2
456MAX-731-43OS
**OFFSET
GB752SR MODELS MUST USE -45 LENGTH OR LONGER ON ALL 752 STYLE NOSES
"A" CODE
NAS1398A & NAS1399A
PLEASE NOTE: Due to
lever assembly length,
the GB752SR Tools
require -45 min. nose length
for all straight noses.
4) BACS53B -10 ONLY
BLIND RIVET (SINGLE ACTION)
WITH OR W/OUT DRIVE WASHER
NAS1900 S & U SERIES
GAGE BILT CERTIFIES THE GB752 WILL INSTALL THE ABOVE FASTENERS
ASP 2, ASP PF, ASP 4 FF,
ASP 2 F, ASP 2 LC
CHERRYM AX®, T RIVET® AND M BC® ARE REGISTERED TRADEM ARKS OF CHERRY AEROSPACE FASTENERS. AVEX®, KLAM P-TITE®, TLR®, HEM LOK® AND M ONOBOLT® ARE REGISTERED
TRADEM ARKS OF AVDEL UK LIM ITED. ASP®, M AGNA-LOK® AND M AGNA-BULB® ARE REGISTERED TRADEM ARKS OF ALCOA INC. BULB-TITE® IS A REGISTERED TRADEM ARK OF GESIPA
FASTENERS USA, INC. ULTRA-GRIP® IS A REGISTERED TRADEM ARK OF EM HART TEKNOLOGIES.
CLOSED END
NAIL RIVET
(ALUMINUM MANDREL)
NAS1719, NAS1720
NAS1721
11/14
