7
Rev. 1/23
GB713SR
-
8 INSTALLATION TOOL
S/N: 1024 AND ABOVE
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
Images may not reflect actual tool
PRINCIPLE OF OPERATION
Pressurized Oil
Unpressurized Oil
Pressurized Air
Unpressurized Air
When the lever assembly is depressed, the pressurized air inside of the tool is released allowing spring pressure to move the valve
spool assembly causing the air to be redirected. The air is directed to the top of the air piston assembly, moving it in a downward
direction. The air below the air piston assembly is then directed through the valve sleeve and exhausted out of the bottom of the tool.
Simultaneously, the piston rod assembly connected to the air piston assembly is also moving down, forcing hydraulic oil up and into
the front side of the head cylinder, causing the piston to move to the rear of the head cylinder. The internal components of the attached
nose assembly are also moving with the piston to start the fastener installation. When the fastener installation is completed, the lever
assembly is released. Air pressure is then built up inside of the handle assembly causing the valve spool assembly to return to its
original position and reversing the sequence, allowing air to return to the rear of the piston, moving the piston to the forward position.
PULL Cycle
RETURN Cycle
Air Piston
moves up
Air Piston
moves down
Piston Rod Assembly
moves up
Piston Rod Assembly
moves down
Air exhaust
Air exhaust when
lever assembly depressed
Air exhaust
