![background image](http://html.mh-extra.com/html/gage-bilt/gb713/gb713_original-instructions-manual_555862004.webp)
4
7/11 REV 5/22
GB713 Installation Tool
SPECIFICATIONS
Hand Held Weight
-
6.50 lbs. (2.9 kg)
Air pressure req'd
-
90
-
100 p.s.i. (6.2
-
6.9 bar)
Air consumption
-
.30 SCF/cycle (8.50 L/cycle)
Hydraulic oil
-
Automatic Transmission Oil
Dexron III, or equivalent.
Setting stroke
-
.760" (19.3 mm)
Rated pull load
-
4,500 lbs. (20.0 kN)
Noise level
-
81.5 dB(A)
Vibration
-
Tested–
No hazards found.
The GB713 is a pneumatic
-
hydraulic tool designed specifically for the efficient installation of blind rivets. It weighs 6.50 lbs. (2.9 kg)
and can be operated in any position. It has a .760" (19.3 mm) fastener setting stroke and a rated pull load of 4,500 lbs. (20.0 kN) with
90 psi (6.2 bar) air pressure at the air inlet.
The GB713 installation tool operates on 90 to 100 psi (6.2
-
6.9 bar) of air pressure, with 90 psi (6.2 bar) providing the maximum efficiency.
At 90 psi (6.2 bar) of air pressure, the GB713 does not exceed 81.5 dB(A) and consumes .30 SCF/cycle (8.50 L/cycle).
The air inlet is provided with 1/4
-
18 female pipe thread to accept the users air hose fitting.
NOSE ASSEMBLIES ARE NOT FURNISHED WITH TOOL AND MUST BE ORDERED SEPARATELY. (See nose assembly selection chart
on pg. 18 for nose assembly recommendations).
DESCRIPTION
WARNING
:
Any other use is forbidden.
ENVIRONMENTAL USE
WARNING
:
Do not operate in an explosive atmosphere.
The GB713 can be operated between 0ºF
-
118ºF (
-
17.8ºC / 47.8ºC)