4
6/12 REV 4/22
GB703SR INSTALLATION TOOL
:
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
SPECIFICATIONS
Hand Held Weight
-
1.50 lbs. (.68 kg)
Air pressure req'd
-
90
-
100 psi. (6.2
-
6.9 bar)
Air consumption
-
.16 SCF/cycle (4.53 L/cycle)
Hydraulic Oil
-
Automatic Transmission Oil,
Dexron® III, or equivalent.
Setting stroke
-
.780" (19.81 mm)
Rated pull load
-
2,200 lbs. (9.79 kN)
Noise level
-
81.5 dB(A)
Vibration
-
Tested
-
No Hazards Found
The GB703SR is a pneumatic
-
hydraulic split handle installation tool designed specifically for the efficient installation of blind rivets.
This tool
’
s unique "split" system provides the operator with a lightweight ergonomic tool. The handle and head assembly when held
in hand weighs just 1.5 lbs. (.68kg). The entire split handle installation tool weighs 4.5 lbs. (2.04 kg). It has a
.780”
(19.81mm) fastener
setting stroke.
The
GB703SR split handle installation tool operates on 90 to 100 psi (6.2
-
6.9 bar) of air pressure, with 90 psi (6.2 bar) providing maximum
efficiency. At 90 psi (6.2 bar) of air pressure, the GB703SR does not exceed 81.5 dB(A) and consumes .16 SCF/cycle (4.53 L/cycle).
The GB703SR comes with 3 feet (.91 m) of hose. Hoses can be attached in the top rear or the bottom of the split handle depending on
the application. Vacuum systems are available for this tool, please consult our engineering department for specific applications.
The air inlet is provided with a 1/4
-
18 female pipe thread for accepting the user's air hose fitting.
UNLESS ORDERED FASTENER SPECIFIC (I.E. GB703SR/4N), THE STANDARD GB703 IS FURNISHED WITH NOSE ASSEMBLY 6N
-
703
-
18
AND A SPARE NOSE TIP (10202) AND FOLLOWER (40307) TO CONVERT TO A 4N
-
703
-
18. ALL OTHER NOSE TIPS MUST BE ORDERED
SEPARATELY. WHEN ORDERING TOOL FASTENER SPECIFIC, PLEASE CONTACT GAGE BILT FOR MORE INFORMATION.
DESCRIPTION
WARNING
:
Any other use is forbidden.
ENVIRONMENTAL USE
WARNING
:
Do not operate in an explosive atmosphere.
The GB703SR can be operated between 0ºF
-
118ºF (
-
17.8ºC / 47.8ºC)
