Gadspot S series User Manual Download Page 65

Page: 65 / 77

H.264 Super Digital Video Recorder User Manual

Picture

5.3

There are two ways to remote control the device with cloud technology:

SerialNo.: enter SerialNo of DVR can realize remote access (way to get SerialNo: start up and choose

“desktop shortcut menu”



“info”



“version”)

2. User: need to register a user name, and then enter the user name and password to login; need to add the device

after login (enter “device management” page can finish adding device); after finish adding device, the added

device will appear in the left column of “my devices”. Click on the current equipment for preview, playback,

configuration and operation

Picture 5.4 Remote operation

5.3 Client CMS software operation

CMS software is used on the same PC, support control multiple DVRs at the same time.

Please take out the CD-ROM in the accessories, copy the CMS install software in the CD-ROM After

installation on the local PC, double click the “CMS”, open the control interface appears in Picture 5.3, default

without password, the client can set the login password

(Note: The password for the CMS client password,

non-DVR login password)

Summary of Contents for S series














































































Search results

Summary of Contents for S series

Reviews:

Brands by name

Popular brands

Gadspot S series, User Manual

Search results

Summary of Contents for S series

Reviews:

Brands by name

Popular brands