8
5
Operation illustration
(STB/DVD...)
2.3 Product placing
Transmitter TXV2428 placing:
When using PC, connect the cable correctly following the instruction.
When using STB and DVD, put the transmitter onto the A/V device
(IR remote sensor 2-3cm forward), right towards the IR receiver of the
A/V device.
1)
2)
Front view
Left view
There is infrared remote control or IR on the IR receiving sensor of
STB or DVD, please put the IR remote sensor of transmitter towards it.
TXV2428 front IR remote sensor as below:
“
”
“
”
Front IR remote sensor
Notice:
3. Operation illustration
3.1 Panel operation
1) Signal CH selection
Press source switch to convert to PC/AV (refer to exterior illustration to
get PC/AV input terminal). Only when transmitter and the receiver are
in the same channel, signal can be transmitted normally. Transmitter
(TXV2428) will automatically follow your operation instruction to
switch to signal channel when you have PC/AV switching operation on
the side of the receiver (TRV2402).
Panel indicator status as below:
PC selected status
AV selected status
2) Power on/off
Press
“ ”
enter or exit standby status.
Power on/off status panel indicator as below:
Power on: previous power-off state
Power off: all indicators off
Exterior illustration and installation
(STB/DVD...)
Summary of Contents for VC108
Page 2: ...Contents ...
