Gadhouse Brad retro, Manual

Page: 12 / 28

12
GETTING STARTED
Unpacking and power source
1. Remove packing material from Brad record player
2. Remove power adaptor from the gift box of Brad record player
3. Remove tie from adaptor
4. Set the record player properly on a flat, level surface
5. Open the dust cover (12)
6. Remove black-tie wrap from tone arm holder (9)
7. To begin using the turntable, remove the stylus guard by gently pull-
ing toward yourself from front of needle (13)
8. To continue using the turntable, release tone arm (15) from tone arm
holder clip (9) by gently pushing to the right. (However, when finished
playing, please lock the tone arm holder by gently pushing to the left and
protect needle by inserting the stylus guard)
9. Plug the power adaptor into an appropriate wall outlet
10. Plug the small end of the power adaptor into the power jack (17) on
the back of the Brad record player
11. Let’s rock and roll by turning the Power Control Knob (1) to the ON
position
OPERATION
AUDIO INPUT
Turntable function (LP)
1. Turn on the power by turning the Power Control Knob (1) to the ON
position. Then, turn the function control knob (3) to the “LP” position to
start turntable function.
2. Set the speed control switch (6) to the correct speed of record you
will be playing.
3. Place the record on the record player, or place the Brad mat before
you place the record.
4. Lifting up the cue lever (10), move the tone arm (15) to the desired
starting point on the record, then lower the tone arm (15). The record will
start playing.