Preface
This Instruction will
guide
you how to use the product. Meanwhile it provides the
necessary information related to the product, such as the information for
operating
and handling. You are recommended to read the Instruction carefully and understand
all contents herein before
operating
. Please keep the Instruction
carefully
. We hope
this product
satisfied
with your demand and sever you
better
.
Product Assurance
This product
is with
FCC and CE certificate and
had inspected
by the authorized
organizations where was found to comply with the recommended indexes. User is
under our safety assurance when operating this product.
Instruction for Use for Time-signal Clock
I. Basic functions
1. 5 buttons: HR, MIN, SET, LIGHT, TALK/SNZ;
2. The time & minute can be displayed in a 3.5 bit
LCD panel
.
Time-showing
system of
12 hours and 24 hours
is available
;
3. Multiple rings for choice: Beep, cock, etc.
5 melodies for option
.
4. The time alarm will be triggered every 10 minutes if the clock is on the snooze
function. It can alarm 6 times maximally.
5. Two on-the-hour alarm functions for choice;
6. The ring of “Beep” will be become louder generally.
And it will last 1 minute
;
7. If
adopting
the melody as the ring, the clock will alarm when the melody ends.
II. Function operation
1. When switching the power on, the whole LCD will display; after the ring of a melody
ends, the clock will display time;
2. Press “Set” button under the Time mode to set as per the following sequences (the
display will flash simultaneously):
Time setting
→ Alarm setting → On
-the-hour alarm setting
3. Press “HR” button under the Time Setting mode to set hour and “MIN” button to set
minute;
4. Press “HR” button under the Alarm Setting mode (Symbol:
) to set hour and
“MIN” button to set minute. Press “SNZ” button when alarming, the clock will re-alarm
every 10 minutes, and will send alarm by 6 times at most;
5. Under the On-the-hour Alarm Setting mode (the symbol of alarm and the on-the-hour
alarm will flash):
It will open and close the function (Symbol:
) by pressing the “HR” button, but send
alarm during the time from 7:00am to 9:00pm (Symbol:
); it can activate the inactivate
the alarm ring by pressing “MIN” button (Symbol:
).
6. Under the Time Mode and if the “HR” button is pressed, it can shift the hour system
(12/24 hour system); by pressing “MIN” button, it can select the alarm ring.
7. Under any modes, it can turn the background light off by pressing the “LIGHT” button.
8. Under any modes, it can report the time by pressing the “TALK” button.