3
automatically switches from full charge to maintenance status to
maintain batteries during prolonged periods of storage without
overcharging or damaging the battery.
6) The CT-15000 has four external holes for mounting. Mount the
charger in a desired location with equipped self-drill screws. It is
important to keep in mind the distance to the battery.
7) Following is the charger
’
s technical specification:
AC Input
220-240VAC, 50-60Hz, 2.5A
DC Output
12VDC, 15A;
24VDC, 7.5A;
12VDC, 20A (300 seconds)
Temperature Controlled
Charger Type
8 steps, Full-automatic Charging Cycle
Start Voltage
> 1V
Housing Protection
IP33
Battery Type
All Types of 12V &24V Lead-acid
Batteries, and 12V Lithium Ion Batteries
Battery Capacity
50-200Ah (24V), 50-400Ah (12V),
Maintains All Battery Sizes
Accessories Included
Clamp Connectors
，
Ring Connectors
Ambient Temperature
0
℃
~ +40
℃
CONNECTING TO THE BATTERY
1) Identify polarity of battery posts. The positive battery terminal is
typically marked by these letters or symbol (POS,P,+). The negative
battery terminal is typically marked by these letters or symbol (NEG,N,-).
2) Do not make any connections to the carburetor, fuel lines, or thin
metal parts.
3) Identify if you have a negative or positive grounded vehicle. This can
be done by identifying which battery post (NEG or POS) is connected to
the chassis.
4) For a negative grounded vehicle (most common): connect the RED
POSITIVE clamp first to the positive battery terminal, then connect the
BLACK NEGATIV clamp to the negative battery terminal or vehicle
