background image

8

period.
3) This warranty is void if the product has been damaged by accident, in
shipment, unreasonable use, misuse, neglect, improper service,
commercial use, repairs by unauthorized personnel or other causes not
arising out of defects in materials or workmanship.

Important safety instructions

1)This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for
their safety.
2)Children should be supervised to ensure that they do not play with the
appliance.
3)If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified persons in order to avoid a hazard.
3)The battery terminal not connected to the chassis has to be connected
first. The other connection is to be made to the chassis, remote from the
battery and fuel line. The battery charger is then to be connected to the
supply mains;After charging, disconnect the battery charger from the
supply mains. Then remove the chassis connection and then the battery
connection.
4)Do not recharging non-rechargeable batteries.
5)During charging, the battery must be placed in a well ventilated area.

Summary of Contents for CT-1000










Reviews: