GAC GS5, Manual

Page: 228 / 285

6. Usage and Maintenance
– Lift the wiper arm. Press the locking button
①
.
Slide the wiper blade upward to remove it.
– Place a new wiper blade back to the wiper arm
in reverse steps, and install after hearing a
“click”.
– Carefully lower the wiper arm back to the
windshield.
– Switch the Ignition Switch to “ON” gear again,
making the wiper arm back to its original
position automatically.
Replacing Rear Windshield Wiper Blade
– Lift the wiper arm.
– Draw and remove the wiper blade
①
.
– Install the new wiper blade back to the wiper
arm.
– Carefully lower the wiper arm back to the
windshield.
It is recommended to replace your wiper
blade at authorized GAC Motor's dealer when
necessary.
Caution
• When lifting the wiper arm, grasp the wiper
arm with hand, and do not grasp the soft wiper
blade.
• Be sure to use new wiper blade with the same
length and specification.
• Carefully lower the wiper arm to prevent
striking the windscreen due to instantaneous
drop.
• Check the condition of the wiper blades
regularly, and replace them as required.
Replace any damaged wiper blade in time.
• Seriously worn or dirty wiper blade is very
easy to scratch the windscreen, and will
influence the forward visibility and reduce the
driving safety during use.
265
222