77
4. Operation of systems and equipment
4.3.2 Interior lamps
Automatic light-on function of dome lamps
-
Press the switch
①
, so that the button
indicator lamp lights up, and turn on
the automatic light-on function of dome
lamps; Press the switch
①
again, so that
the button indicator lamp is off, and turn
off the automatic light-on function of dome
lamps.
Interior light delay off
When the dome lamps are off and the
automatic light-on function of dome lamps is
activated:
-
If the ENGINE START/STOP button is in
the “OFF” position and one of the doors
is opened, the dome lamps will come on
automatically, and then go out about 30 s
after the doors are closed.
- If the ENGINE START/STOP button is
in the “OFF” position and the doors are
unlocked by remote control, the dome
lamps will come on automatically and then
go out after about 30 s.
- If the ENGINE START/STOP button is
switched from the “ON” position to the
“OFF” position, the dome lamps will come
on automatically and then go out after
about 30 s.
NOTE
When all the doors are closed and the
dome lamps are on as mentioned above,
if the vehicle is locked by remote control or
the ENGINE START/STOP button is set to
the “ON” position, the dome lamps will go
out automatically.
Dome lamp
-
When the dome lamps are off, press the
switch
②
, so that the button indicator
lamp will light up, and all the dome
lamps will light up; when the switch
②
is pressed again, the dome lamps will go
out.
NOTE
The switch
②
will be ineffective if it is not
used to turn on the dome lamps.
