GAC MOTOR GS3 Manual Download Page 86

Page: 86 / 261

4. Operation of systems and equipment

4.3.5 Rearview mirrors

Interior rearview mirror

Manual anti-glare interior rearview mirror

Tab

Manually adjusting the manual anti-glare

interior rearview mirror can reduce the light

reflected off the mirror surface, thus realizing

the optimal rear view.
-

As shown in the figure, the tab is at

a normal rearview position. Push it

backward to offset the light reflected off

the mirror surface to achieve the anti-

glare purpose.

Pull the tab forward to return to the normal

rearview angle.

Exterior rearview mirror

WARNING

Although the curved (convex and

spherical) rearview mirror can expand

the field of view, the reflected object

image is smaller and farther than the real

object. Therefore, when changing the

lanes, do not judge the distance between

your vehicle and the following vehicle by

the reflected image, otherwise accidents

may occur due to wrong judgment.

NOTE

If the function of the exterior rearview mirror

fails, please go to the GAC Motor authorized

shop for inspection in time.

Electric adjustment

Turn the exterior rearview mirror adjusting

knob to the “L” or “R” position (to select

the left or right exterior rearview mirror).

Turn the exterior rearview mirror adjusting

knob up, down, left, and right to adjust the

selected exterior rearview mirror to the

appropriate rearview angle.

After adjustment, turn the exterior

rearview mirror adjusting knob to the “O”

position.

Summary of Contents for GS3






































































































































































































































































Search results

Summary of Contents for GS3

Reviews:

Related manuals for GS3

Brands by name

Popular brands

GAC MOTOR GS3, Manual

Search results

Summary of Contents for GS3

Reviews:

Related manuals for GS3

Brands by name

Popular brands