69
4. Operation of systems and equipment
Initialization and self-learning of power
sunroof
-
When the sunroof is closed, press the end
(arrow B) of the switch until the sunroof
reaches the maximum tilting position and
then release the switch.
-
Press the end of the switch (arrow B)
again and hold it for more than 10 s. At
this time, the sunroof will be initialized. If
two “clicks” are heard, it indicates that the
sunroof initialization is completed.
-
After the initialization, if you press and
hold the end of the switch (arrow B),
the sunroof will be “tilted → closed →
opened → closed” and then will stop, at
this time, the sunroof self-learning will be
completed.
4.2.9 Basic operation of body
anti-theft system
Body anti-theft function - unlock
When the ignition switch is in the “OFF”
position and the vehicle is in the anti-theft
state, if you bring the intelligent remote control
key to approach the vehicle doors and press
the button on the front door handle or unlock
the door by remote control, all the doors will be
unlocked to release the vehicle from the anti-
theft state, and the turn signal lamps will flash
twice.
Body anti-theft function - lock
When the ignition switch is in the “OFF”
position and the four doors, engine hood and
liftgate are closed, if you take the intelligent
remote control key away from the vehicle and
press the button on the front door handle or
unlock the door by remote control, all the doors
will be locked to enable the vehicle to enter the
anti-theft state, and the turn signal lamps will
flash once.
Activation of body anti-theft function
When the ignition switch is in the “OFF”
position and the vehicle is in the anti-theft
state, if the door is unlocked by an illegal key
or is forcibly unlocked, the anti-theft system will
be activated, the anti-theft horn will sound and
the turn signal lamps will flash for about 28 s.
When the vehicle is locked by remote
control and enters the anti-theft state, if the
driver’s door is unlocked with the emergency
mechanical key, the anti-theft system will
trigger the horn to sound and the turn signal
lamps will flash.
NOTE
Before the anti-theft alarm is triggered or
the anti-theft alarm has been triggered,
if you press the unlocking button on the
remote control key or switch the ignition
switch to the “ON” position, the anti-theft
alarm can be canceled and the vehicle can
be released from the anti-theft state.
