Page 21
Tone Acoustic Booth Assembly Instructions v1.0
15
Page 20
Tone Acoustic Booth Assembly Instructions v1.0
14
2
3
4
Use the plywood
spacer to set the
depth of the side
panels with the front
and back panel edges
to 24mm.
Ensure the depth
is 24mm front and
back, top and bottom
and on both left and
right hand side panel
assemblies.
Once aligned, tighten
all fixings.
Align both sides
Fix the panel with 2
x 4mm x 45mm
CSK woodscrews
2
Tighten all fixings.
Do not over tighten.
24mm Plywood Spacer
Replace floor panel
Align side panels and tighten all fixings
6mm Hex key
