The sides and ends of the base can
be fixed together positioning an
anchor leg or short corner bracket
on the outside of the sides and fixed
through the pre drilled holes with
the bolts and nuts supplied (Fig 1).
The short anchor legs are used only
when the base is to sit on a concrete
base.
To fix to the base, drill through the
base bottom and secure using
suitable fixings.
The long anchor legs are used if you
are intending to secure the base to
the ground. The ends of the legs
should be splayed (Fig 2).
Dig a hole in the ground where each
anchor leg will be situated and set
the legs into the holes ensuring the
steel base is square and level before
filling the holes with concrete or
postcrete, then leave to set.
Cut
Bend
Long Ground Spike in
Concrete Plug
Fig 2
Fig 1
assemble steel base
Short Corner Brackets used
when sitting on a Solid Base
such as flagstones
6 x 6
6 x 8
6 x 10
8 x 10
Long Ground Spikes
x 4
x 4
x 4
x 4
Short Corner Brackets
x 4
x 4
x 4
x 4
Nuts and Bolts
x 16
x 16
x 16
x 16
Fixing Bracket
x 8
x 10
x 12
x 14
25mm Pozi Screws
x 8
x 10
x 12
x 14
1806mm 6ft
2380mm 8ft
2954mm 10ft
1806mm 6ft
2380mm 8ft
Fig 1
Long Ground Spike in
concrete plug
=
AL3002
Summary of Contents for essential Series
