GABOR MD-BSL15W, User Manual

Page: 11 / 20

11
Adjusting the
Support Bracket
1. Rotate the locking collar
to loosen it, and then
slide the collar to the
approximate height at
which you want to mount
your monitors.
2. Lock the collar in place
by rotating it until fully
tightened.
3. Slide the support bracket
along the shaft so it
rests on the locking collar,
and use the included 3
mm hex key to fasten
the set screw until fully
tightened.
4. Insert the shaft cap into
the top of the shaft.
Installation Instructions
A
M4x12
A
M4x12
A
M4x12