background image

3

• 

When installing this product, be sure to refer to the mounting instructions 
detailed in this manual; failure to follow the mounting instructions may void 
the product warranty.

• 

It is strongly recommended that this product be installed by a qualified 
professional or installation contractor; Gabor takes no responsibility for any 
product damage or personal injury resulting from mishandling, incorrect 
mounting, faulty assembly, or improper use of this product.

• 

Do not use this product for any flat-panel screen device other than what it is 
intended for; the exact specifications, size parameters, and weight limits are 
found both on the product box and in the instruction manual.

• 

It is recommended that at least two people perform the installation process 
to prevent injury from mishandling or dropping the product or flatscreen 
device; proper safety gear and tools must be used at all times when installing 
this product.

• 

Do not assemble or use the cart on structures that may be affected by 
vibrations or noticeable impacts; do not assemble or use near a heater, 
fireplace, or any other source of direct heat energy. 

• 

This product may contain small parts which can possibly pose a choking 
hazard; keep out of reach of children and pets.

• 

Excessive exposure to liquids may damage the finish of this product; when 
cleaning this product, use only a mild detergent solution and quickly wipe dry 
with a soft cloth.

• 

All images are for illustrative purposes only.

Safety Warnings

Summary of Contents for FPC-85

















Reviews: