10
S
3 mm
Mounting the Monitor
M-C
4X
M-A
4X
M-B
4X
K
VESA
PATTERNS
75
100
75 100
100 × 100 VESA Pattern
1.
Slide M-C washers onto two
screws, and thread the screws
into your monitor’s top two
VESA holes. Leave about 3
mm between the washers and
the monitor.
2.
Hang the monitor on the VESA
plate’s two top notches with
the two installed mounting
screws.
Important!
The washer should be
between the screwhead and the
VESA plate.
75 × 75 VESA Pattern
1.
Thread two screws into your
monitor’s top two VESA
holes. Leave about 3 mm
between the screws and the
monitor.
2.
Hang the monitor on the
VESA plate’s two keyholes
with the two installed
mounting screws.
Important!
Do not use washers for
the top screws on the 75×75 VESA
pattern.
3.
Slide M-C washers onto two screws, and thread the screws into the bottom two VESA holes.
4.
Use the 5 mm hex key (K) to tighten all four screws until snug. Do not overtighten.
Before you attach the VESA plate, hand thread one of the M-A or M-B screws to determine
which one fits your monitor. Make sure the screw is also not too long or too short. If the
screw is too long, it may damage the display. If it’s too short, it may not hold it.
