LANDRY SIDE TABLE
ASSEMBLY INSTRUCTION
To remove adjustable shelves, remove screw from shelf support, then carefully lift shelves up
and out of the case.To reposition adjustable shelves, insert Stem of shelf supports into Holes
in End Panel, as shown. Rest the shelf on the shelf supports, and reinstall screws
Re-Tighten the bolts from inside of the door using Philip Screwdriver (not included). This can to be
done and check periodically to make sure the drawer pull are always tight.
Page 2 of 3
HOLE
SCREW
SCREWDRIVER
SHELF SUPPORT
STEP 1
STEP 2
