20
EN
WEEKLY PROGRAMMES
It is possible to allocate different programs to different days of the week. To do this, the controller has to be upgrade
from 24hr mode (factory default) to 24hr/7days mode as follows:
Move the selector to
0
position, the display will be Off. Press the
key and at the same time turn the selector to
P
position maintaining the
key at least five seconds. The display will show
P-SE
which means that weekly mode has
been set.
SETTING THE DAY: Press the
key more than two seconds and the display will show the number of the day. Set the
correct number, if required, by pressing
+
or
–
keys. Press the
key and the display will show now the time. Press
again the
key and new values will be stored.
To check a programme or to make a new one press
PRG
key: The display will show
dia1
. Press again
PRG
key and
the display will show
00:00
intermittently. Follow now the steps from DAILY PROGRAMMES section until the display
shows again
dia1
. Repeat this process with the 7 days of the week. When the display shows
dia7
the weekly
program will be stored by pressing
+
key.
If the display shows
dia1
then, pr key more than three seconds will copy the day 1 program to day 2
and so on.
It is possible to allocate any of the three temperature levels to all the intervals of any day maintaining the
relevant
key until an audible signal is heard.
To turn back a controller from 24hr/7days to a single 24hr press
PRG
key more than six seconds. This will restore the
factory default settings.
KEYBOARD LOCK
Press the
key more than six seconds and the keyboard will be locked. The display will show
and the
controller will keep on working internally. To unlock the keyboard, press again the
key more than six seconds.
SUN MANUAL OVERRIDE
In programming mode, the heater will maintain the sun temperature set point and will ignore the pre-set program
until the next change in programming temperature level.
Maintain the SUN Key pressed for 4 seconds in programming mode to set the Sun Manual Override. Both luminous
indicators SUN and MOON will be lit. This function could be useful when SUN temperature is required and we do not
want to modify the program.
By pressing the SUN key for 4 seconds with Sun Manual Override activated, the function will be removed and the
heater will follow the programme again.
4.- ADVANCED FUNCTION
OPEN WINDOW DETECTION
