5
PROG
c
MODELS RKSL
CONNECT / DISCONNECT
Time Settings
To perform correct programming it is necessary to set the system time.
To set the system time the unit should be in OFF position, with a symbol
on the display.
Press the
“mod.”
key. Week days indication will start blinking.
With
“+”
or
“–”
keys select present day and press
“
OK
”
to store. Proceed to time settings.
Set the hour with
“+”
or
“–”
keys and press
“
OK
”
to store. Repeat the operation to set minutes.
Press the
“
ON/OFF
”
key to exit.
These four keys perform different
operations depending on the message
of the LCD display.
Press two central buttons at a time for
several seconds to lock/unlock the
keyboard.
ON/OFF key:
Press the key to switch from
OFF to OPERATION
Operation mode key:
Press the key to select
different operation modes or
to set the system time.
Main switch. All the models are
equipped with the switch on the back
surface for general heater
disconnection.
After a long-term disconnection it is
necessary to reset the unit system
time.
OK
1
2
3
4
5
6
7
days
of the
week
