
3.-
Using the panel heater.
NON TIMER MODELS
Open the hinged controls cover to access the controls. After adjustment the control
cover closes automatically.
Switch on the heater by setting one of the two switches marked I-O to “ I “. The off
position is marked “ O “.
You can select half heat or full heat by setting only one of the switches marked I-O to
“ I “ or by setting the two ones (this feature is not available on 750W models). When the
heater is generating heat the neon indicator on the switch will be illuminated.
The heater is fitted with an adjustable thermostat, which enables room temperature to
be controlled by adjusting the setting accordingly. Turn the thermostat control to the
maximum (fully clockwise) to heat the room rapidly. When the desired temperature has
been reached, turn the thermostat control slowly to the left (anti-clockwise) until the
luminous indicator switches off. By leaving in this position, the heater will automatically
maintain the selected temperature.
TIMER MODELS
If the slide switch marked I -O-
is set to the position marked “ I “ the
heater will be always on, under the control of the thermostat as a non timer
model.
If the slide switch marked I -O-
is set to the position marked “O “ the
heater will be in the off position.
If the slide switch marked I -O-
is set to the position marked “
“ the
heater will operate automatically. Set the timer by rotating the dial clockwise
until the correct time is indicated opposite the datum mark. Pull the appropri-
ate segments out to set the desired programme. This programme will repeat
itself every day. The timer may be set to give as many “on” periods of any
length as may be required.
The switch marked I – II provides a choice of half heat or full heat. (not
available on 750W models). When the heater is generating heat the neon
indicator on the switch will be illuminated.
3.- Cleaning and maintenance.
Clean and dust with a dry, soft cloth only when the unit is disconnected and
cold. Do not use solvents or abrasive products for cleaning.
4.- Wiring
PH-125T
PH-150T
PH-200T
PH-075T
PH-075
PH-125
PH-150
PH-200
T: 24h Timer
E1: Element 1
E2: Element 2
S: Safety cut out
C: Switch
L: Luminous indicator
Ta: Ambient thermostat
Brown :
Live
Blue :
Neutral
Green and Yellow : Earth
The symbol on the product or in its
packaging indicates that this product may not
be treated as household waste. Instead it shall
be handed over to the applicable collection
point for the recycling of electrical and elec-
tronic equipment. By ensuring this product is
disposed of correctly, you will help prevent po-
tential negative consequences for the environ-
ment and human health, which could otherwise
be caused by inappropriate waste handling of
this product. For more detailed information
about recycling of this product, please contact
your local city office, your household waste
disposal service or the shop where you pur-
chased the product. These instructions are only
valid in the EU member states.