Note:
● Outdoor ambient temperature display may can’t be selected for some models.
When indoor unit receives " " signal, it displays indoor set temperature.
● Only for the model whose indoor unit has dual-8 display.
●
T
ime setting range: 0.5-24 hours.
●
T
ime interval between two operations can’t exceed 5s. Otherwise, remote
controller will exit the setting status automatically.
Introduction for buttons on remote controller
TEMP
button
TIMER OFF button
9
10
to operate for a while at low speed to dry the residual water inside the indoor unit.
● When the unit operates under X-FAN mode, press "X-FAN" button can turn off
X-FAN function. Indoor fan stops operation immediately.
Press this button can see indoor set temperature, indoor ambient temperature or
outdoor ambient temperature on indoor unit’s display.
T
emperature is set circularly
by remote controller as below:
no display
● When selecting " " by remote controller or no display, temperature indicator on
indoor unit displays set temperature.
● When selecting " " by remote controller, temperature indicator on indoor unit
displays indoor ambient temperature.
● When selecting " " by remote controller, temperature indicator on indoor unit
displays outdoor ambient temperature.
Once press this key to enter into TIMER OFF setup, in which case the TIMER OFF
icon will blink.
The method of setting is the same as for TIMER ON.
11
Summary of Contents for IGB12MB-K3DNB7G
Page 2: ......
