Elnur
powered by Gabarrón | RBC | Installation Guide
5
3.1. SWITCHING ON THE HEATER
Press the [On / Stand-by] key to turn on / off the unit.
When the device is active, the mode and temperature
are displayed. During “Stand-by” the display shows
the current time and the day of the week.
Note:
When the device enters “Stand-by” mode, 2 sounds
approximately half a second long are emitted. When
the device is switched on, it emits a sound lasting
one second.
3.2. COMFORT AND NIGHT TEMPERATURES
2 different levels of temperature can be set:
- Comfort Temperature: It is the temperature used for
Program, Pilot Wire and Comfort modes.
- Night Temperature: It is the temperature used for
Night and Program modes.
The desired temperature can be set pressing the [+]
and [-] keys. The range of configurable temperature
is 7 °C - 32 °C.
Note:
Night Temperature must be below Comfort Temperature.
For this reason, the Night Temperature can be set to
a value between 7 °C and the Comfort Temperature
setpoint.
3.3. OPERATING MODES
An icon on the display indicates the current operating
mode. Check the current illuminated icon in your display
to know the operating mode.
PILOT WIRE MODE
Within this mode, the radiator is controlled by a
remote-control unit.
1. Press the [Mode] key until the “Pilot Wire” icon is
displayed.
2. Set the desired temperatures through the
[+] and [-] keys.
The operating mode will be selected by the Pilot-Wire
Control Centre.
The device operates with the most advanced “Pilot
Wire” system with six commands, which allows the
following functions:
Standby:
Power off the heating element, the device
remains active.
Comfort:
Maintains the “Comfort” temperature set by
the user.
Eco:
Maintains the room temperature 3.5 °C below the
“Comfort” temperature.
Frost Protection:
Fixed 7 °C are set.
Eco-1:
Maintains the room temperature 1 °C below the
“Comfort” temperature.
Eco-2:
Maintains the room temperature 2 °C below the
“Comfort” temperature.
COMFORT MODE
The “Comfort” mode maintains the room temperature
to the selected value. To set this operative mode:
1. Press the [Prog] key until the display shows the
“Comfort” icon.
2. Set the desired temperature using [+] and [-] keys
and wait until the displayed temperature stops
blinking.
NIGHT MODE
The “Night” mode sets a value of temperature below
the “Comfort” temperature value. It is suggested to set
this operating mode during the night or when the room
is not occupied for 2 or more hours.
1. Press the [Prog] key until the display shows the
“Eco” icon.
2. Set the desired temperature using [+] and [-] keys
and wait until the displayed temperature stops
blinking.
FROST PROTECTION MODE
In “Frost Protection” mode, the temperature is fixed to
7 °C. The device activates the heating element when
the room temperature falls below 7 °C. It is suggested to
set this operating mode when the room is not occupied
for several days.
1. Press the [Prog] key until the display shows the
“Frost Protection” icon.
ECO FUNCTION
This mode lowers the set temperature 3 °C regardless
of other radiator settings.
1. To activate / deactivate the function, press the
dedicated [ECO] key. ECO icon is displayed.
11
EN
3.2. COMFORT AND NIGHT TEMPERATURES
2 different levels of temperature can be set:
-
Comfort Temperature: It is the temperature used for Program, Pilot Wire and Comfort modes.
-
Night Temperature: It is the temperature used for Night and Program modes.
The desired temperature can be ser pressing the [+] and [-] keys. The range of configurable temperature is 7ºC - 32ºC.
Note: Night Temperature must be below Comfort Temperature. For this reason, the Night Temperature can be set to a value between 7ºC
and the Comfort Temperature setpoint.
3.3. OPERATING MODES
An icon on the display indicates the current operating mode. Check the current illuminated icon in your display to know the
operating mode.
Pilot Wire Mode
Within this mode, the radiator is controlled by a remote-control unit.
1.
Press the [Mode] key until the “Pilot Wire” icon is displayed.
2.
Set the desired temperatures through the [+] and [-] keys.
The operating mode will be selected by the Pilot-Wire Control Centre.
The device operates with the most advanced “Pilot Wire” system with six commands, which allows the following functions:
Standby: Power off the heating element, the device remains active.
Comfort: Maintains the “Comfort” temperature set by the user.
Eco: Maintains the room temperature 3,5ºC below the “Comfort” temperature.
Frost Protection: Fixed 7ºC are set.
Eco-1: Maintains the room temperature 1ºC below the “Comfort” temperature.
Eco-2: Maintains the room temperature 2ºC below the “Comfort” temperature.
Comfort Mode
The "Comfort" mode maintains the room temperature to the selected value. To set this operative mode:
1.
Press the [Prog] key until the display shows the “Comfort” icon.
2.
Set the desired temperature trough [+] and [-] keys and wait until the displayed temperature stops blinking.
Night Mode
The "Night" mode sets a value of temperature below the "Comfort" temperature value. It is suggested to set this operating
mode during the night or when the room is not occupied for 2 or more hours.
1.
Press the [Prog] key until the display shows the “Eco” icon.
2.
Set the desired temperature trough [+] and [-] keys and wait until the displayed temperature stops blinking.
Frost Protection Mode
In “Frost Protection” mode, the temperature is fixed to 7°C. The device activates the heating element when the room
temperature falls below 7°C. It is suggested to set this operating mode when the room is not occupied for several days.
1.
Press the [Prog] key until the display shows the “Frost Protection” icon.
ECO Function
This mode lowers the set temperature 3ºC regardless of other radiator settings.
1.
To activate / disactivate the function, press the dedicated [ECO] key. ECO icon is displayed.
Pilot Wire
Comfort
Night
Frost Protection ECO Function
Program
