GA SMART MINI TS-EVC07-003, Manual, Page: 7 / 12

Wall installation
Installation method 1:
Installation method 2:
1. Use a drill to make
mounting holes in
suitable locations on
the wall. 2. Insert the fixing
dowels into the
holes.
3. Screw the charger
backplate fastener to
the wall.
4. Align the charger
from the top and
place it on the
mounting back plate.
5. Arrange and secure
the incoming cables
of the charger.
6. Remove the
protective film from the
front of the charger to
start using the product.
1. Remove the two fixing screws
from the bottom of the cover
plate, then push the front plate
upwards to remove.
2. Remove the seven fixing
screws around the internal
panel and remove the
panel.
3. Use the drill to
make
mounting
holes in suitable
locations
on the
wall.
4. Insert the fixing
dowels into the
holes.
5. Fix the
disassembled filler
back panel to the
wall.
6. Replace and
secure the removed
panel
and front
panel.
7. Remove the
protective film from
the front of the
charger to start using
the product.