Ga.Ma Salon Exclusive Pro 8, User Manual

Page: 16 / 79

repaired free of charge or immediately replaced with
similar product of equal or greater value.
PRO 8
RECOMMENDATIONS FOR USE:
Before using the hair clipper the hair must be clean and dry. We recommend cutting small quantities of hair at
a time, adjusting the cutting length gradually until finding the one you want. The blades risk getting stuck if too
fast movements are made or if a lot of hair is cut at the same time. It can be used without attachment comb
to trim beard, neck hair and sideburns.
BEFORE USING THE APPLIANCE:
Lubricate the blade before the first use. Read the instructions contained in the section “HOW AND WHEN TO
LUBRICATE THE BLADE”.
USE INSTRUCTIONS:
Insert the desired attachment. This operation should always be done with the hair clipper turned off.
Turn on the hair clipper by pressing the (O/I) button.
Turn off the hair clipper by pressing the (O/I) button.
INSERTION OF COMBS:
The supplied combs have two lateral seats for an easier snapping on the base. To insert them on the hair
clipper, lay the blade on the comb and make it slide on it until you hear a slight click: insertion will now be
completed. To remove the combs just extract them making the blade slide outwards.
CUTTING LENGTH ADJUSTMENT:
The PRO 8 hair clipper offers the possibility of making finishing touches from 0.8 mm to 3 mm (if used without
any guide comb attached and using the adjustment lever) and performing classic hair cuts with the following
lengths: 3, 6, 9 and 12 mm.
15