2)
Remove the protective backing of the Velcro and mount the Velcro pads in the correct positions, attach the
two speakers on the Velcro inside your helmet, the speaker with
short
wire cord for
left
ear, the speaker with
long wire cord for right ear.
the speaker with short wire cord the speaker with long wire code
for left ear for right ear
Adjust the position of the microphone
Note: To reduce the external noise, you need to close the visor while riding, and please adjust the position of
the microphone to be right in front of your mouth with the foam just touching your lips, the visor should cover
the microphone effectively! (Minimizes wind noise contribution)
V
X
Correct position of the microphone Wrong position of the microphone
3) Plug in the positioned headset to the communications module and attach it to the side of the helmet.
Operation:
The operation is friendly and very easy.
Pairing with your Bluetooth phone for the first time
Note: You must have a Bluetooth enabled phone to “Pair” with the G6
The rider and pillion pairing their headsets with their respective mobile phone should be at different time,
Before using the G6, please familiarize yourself with Bluetooth function of your cell phone. Read the instruction
manual that came with the phone so you can enable its Bluetooth function.
Before you can use this G6 in combination with your phone, you will need to “pair” it with your cell phone for the first time.
This usually only needs to be performed once with that individual phone however follow the instructions supplied by the phone
manufacturer and save the “pairing” so it will be automatically connected when this Phone and the G6 come into contact
again.
-------------------------------------------------------------------------7-------------------------------------------------------------------------------
